When Is The Circular Saw Blade To Be Polished? What Damage Will Be Caused If It Is Not Repaired in Time

Under what circumstances does the circular saw blade need to be polished?

1. According to the square number of sawing

When the circular saw is sawn, the square number of saw will flash on the touch screen. A circular saw blade will have a reference to the square number of saw cutting according to different brand circular saw equipment. When it reaches this value, it is required to replace new circular saw blade under normal circumstances. The old circular saw root after removal shall be repaired or other treatment according to the usage.

2. View the color of the sawdust

If the color of circular saw machine is deeper, it is necessary to check whether the circular saw machine equipment is normal, and then check whether the circular saw blade needs to be polished. The color of the iron chip is a warning to us. Generally, the conflict force of circular saw blade cutting will become larger.

3. Dynamic and static during sawing

If in daily operation, it is found that the circular saw machine equipment has a large abnormal noise during sawing, or the burr after sawing is too large, first, the saw blade should be checked, and the possibility of dull saw teeth is relatively large, which is also a signal of the need for grinding. What damage does the circular saw blade not be replaced or polished in time?

1. Impact on equipment

The circular saw blade has reached the condition of grinding. If the circular saw blade is not replaced and continued to be used, it will have a very severe impact on the overall function of the equipment. Because the saw blade saw saw saw saw is no longer sharp, the force will be more and more, the power required for work will also be larger and the conflict will increase. Then, if the continuous application is continued, the aging of the equipment will be accelerated and the wear of each accessory will be increased!

2. Damage to the blocked workpiece

If the circular saw blade needs to be repaired and not replaced, it will have a large conflict force when sawing the workpiece. Because the saw tooth becomes dull, the force on the sawing will also become larger. At this time, the surface of the workpiece will be very uneven and there will be no burr!

3. Tooth breakage or injury

The saw blade has reached the grinding time and continues to use it. It will form a large extent that the broken teeth of the circular saw blade may break as a whole! When severe, the matrix will crack and splash outside the equipment, which will cause injury to people