Analysis Of The Downwind Of The Metal Circular Saw Blade With Too Many Teeth

A. If iron chips enter the saw tooth gap of metal circular saw blade, it is not easy to discharge, which will cause the sawtooth and the cut data to be unable to touch well, which will affect the quality of blocking.

B. The elasticity is too low, the number of sawtooth cannot be added, only cut;

C. The chip tank is too full, and the unstable elements are formed simply;

D. If the number of teeth of metal circular saw blade is so many, it will lead to the occurrence of data jam;

E. The heat dissipation is difficult, which causes the temperature too high and the working stability is greatly affected;

F. Compared with the large saw saw, the wear is faster, forming the cost of adding;

J. The length of time used, that is, the number of life, is relatively low.