What Kind Of Saw Blade Is Used To Cut Metal Pipes?

Direct use of grinding wheel on the line, the section is very smooth. And it like a knife to cut tofu smooth, no danger. Is friction heat, to properly master the cutting schedule, do not let the pipe soften. Replacing saw blades with teeth is not recommended. Angle mill speed is very fast, about 13000 RPM, and it is held by hand, it is not easy to control, and it is easy to be opened by reaction force when cutting with tooth saw, which is dangerous. If you use an Angle grinder to replace the steel wire wheel brush to remove rust, you will know that the pressure is large, and you can't control the spring out. Dedicated marble machine or wood sawing electric garden saw, are base, and only about 5000 RPM, half of the Angle grinder, or less. When working, the machine base is pressed on the plate, and the rotation direction of the saw blade is from bottom to top along the cutting direction. The reaction force is to make the base more tightly pressed on the surface, so the machine will not spring open. Angle mill does not have this base, the progress is slightly faster, brush a fly out, it is easy to hurt people. All dangerous accidents are made this way.