What About The Size Of The Saw Blade?
Jun 24, 2022
Specification and dimensions can refer to the following data:
The diameters are 110MM (4 inch), 150MM (6 inch), 180MM (7 inch), 200MM (8 inch), 230MM (90 inch), 20MM (10 inch), 300MM (12 inch), 350MM (14 inch), 400MM (16 inch), 450MM (18 inch) ,500MM (20 inches), etc., the precision cutting plate saw bottom groove saw blade is mostly designed for 120MM.
Different cutting materials should choose different saw blades, when choosing the saw blades, according to the machine spindle speed, the thickness of the processing workpiece and the material, the outer diameter and aperture of the tool selection.
The spacing to be rated should be 15-25mm with a reasonable number of teeth based on the material.The number of saws is related to the quality of the cutting and the service life of the tool. The cutting speed of the materials is generally at 60-90 m / s.
The greater the speed of the cutting, the greater the vibration generated, the stability of the saw blade received decreases, and the service life is not long.Saw blade as a tool, there are many factors affecting the service life of the tool, and it is also crucial to the choice of saw blade.
1. If the saw blade is not used immediately, it should be put flat or use the inner hole to hang it up. Other items or feet should not be piled up on the flat saw blade, and attention should be paid to moisture prevention and corrosion prevention.
2. When the saw blade is no longer sharp and the cutting surface is rough, it must be repaired in time.Grinding can not change the original Angle, and destroy the dynamic balance.
3. The internal diameter correction and positioning hole processing of the saw blade must be carried out by the factory.If the processing is poor, it will affect the use effect of the product, and may occur dangerous. In principle, the pore expansion should not exceed the original aperture of 20mm, so as not to affect the balance of stress
