How To Prevent Multi Blade Saw From Burning

Multi - blade saw blade burning is a common problem encountered in wood processing plants, but also difficult to solve the problem completely. The quality of saw blade directly affects the processing efficiency and product quality. The worst result of many of the blade saws was burning blades. Burning saw blade directly results in scrap of saw blade and affects the working process.

Multi - blade saw burning saw blade main reason

1, heat dissipation is not good. It's best to buy a saw blade with a cooling hole, perhaps to add water or other coolant to lower the temperature.

2. Too many teeth. Multi-blade saw due to the more blades of the device, the larger the resistance contrast, the more teeth the greater the resistance, the easier to burn the saw blade.

3. Poor excretion. Sawdust is not easy to discharge will also cause local too hot, equipment must have a good discharge system.

4. Raw materials. Particleboard is very difficult to saw. If the chipboard is of poor quality, too much impurity can burn the saw blade.

In actual operation, the following parts need to be checked

1, check whether the sink is blocked

2, check whether the water is sufficient

3, check whether the spindle is misplaced

4. Check whether the navigation axis and spindle are on the same plane

5. Check whether the feeding chain is balanced with the saw blade

Check and adjust accordingly.

Multi-blade saw blade quality is uneven, we must choose high-quality multi-blade saw blade, do not be greedy to buy poor quality saw blade, so not only delay production, but also may cause mechanical accidents.