How to Change the Circular Saw Blade?

BEFORE you change it :

No special skills or requirements are needed to change the blade on the circular saw blade. But it’s really helpful to be familiar with how the saw operates.

In addition, the blade tips on old and new saw blades are too sharp. So we need to be care when handling it. Wearing a pair of flexible leather gloves will protect hands while still allowing the user enough finger dexterity to change the saw blade easily .

Here below let us share with you below some simple and clear steps and then you will know well about to change the saw blade quickly. 

1 To disconnect the circular saw from its power source.

2 To locate the circular saw wrench stored on the tool.

3 To depress the spindle-lock button to keep the saw blade from spinning. 

4 To use the circular saw wrench to loosen the bolt that holds the blade in place. 

5 To push the blade guard out of the way to remove the old blade. 

6 To slip the new blade in place and replace the bolt.

Tips you need to pay attention when changing the saw blade : 

When learning how to put a blade on a circular saw, pls keep in mind that circular saw blades cut from the bottom upward. The saw blade is labeled as to which direction the tips should face. Some professionals turn saw blades around in order to make specialized cuts. But for the best general use and install the blade in the direction which is suggested by the manufacturer.