Maintenance details of integral tungsten steel saw blade milling cutter

All tungsten steel saw blade milling cutters are made of alloy metal. If they are not used, they will be oxidized if they are not properly handled. It is also the rusty state we call it. At this time, the carbide saw blade can not be used, and it must be used for rust removal.

1、 Factors causing rust

Generally speaking, when tungsten steel saw blade milling cutter is not used, it should be put in a ventilated and dry place, and the packing should not be damaged, and it is better to store it on wooden shelf.

The factors that cause the saw blade rust are: the package is damaged and the place is wet. Water mist is produced here simply from the damaged import and the hard alloy saw blade touch, which will cause oxidation.

Or maybe it is because in the place where the saw blade is stored, liquid enters the inside of the saw blade package, causing oxidation and then rust. Therefore, we must pay attention to the position when we do not use the saw blade, and we must keep ventilation and drying.

All tungsten steel saw blade milling cutters

2、 How to deal with the rusty milling cutter of all tungsten steel saw blades

If saw blade is rusted, do not take it as usual, which will easily form damage of saw blade, especially simple tooth breakage, we must carry out rust removal and other operations before use.

1. First look at the rusted parts, if it is the base part, this is very good treatment, we generally use the method of rust removal.

2. If the rusted part is in the position of saw tooth, there are some troubles. In this case, it is necessary to deal with diamond wheel, because the saw tooth is the most sensitive part of the saw blade. Once the treatment is not properly done, it will seriously affect the use of cemented carbide saw blade, which may lead to the scrapping of saw blade.

The best way to deal with the rust of saw blade is actually the usual maintenance. Some details of the treatment, as long as the prevention is not the most effective way to deal with the problem.