How to solve the instability of circular saw blade

A lot of equipment will use the circular saw blade, through it can make the product can quickly finish some processing work, so it will not affect the normal operation of the enterprise. However, when using the circular saw blade, there will be some unstable factors, and many workers will be very worried. Therefore, the following high-speed circular saw manufacturer will talk about the unstable factors and treatment methods of the circular saw blade:

A. Wave sawing:

1. The reason of the problem is: the side jump of the saw blade tip is large; Treatment: check the condition of the circular saw and regrind the circular saw blade

2. The reason of the problem is that the thickness of saw tooth is not equal; Treatment: check and correct the amount of sawing

3. The reason of the problem is that the serrated edge is blunt and polluted; Treatment: clean and grind the serrated part

4. The cause of the problem: the backer is not parallel to the feed direction; Treatment: check the backers and proofread

5. The reason of the problem is that the cutting speed is too low; Treatment: increase the diameter of the circular saw blade or improve the speed

6. The cause of the problem is improper tension; Treatment: check the tension and roll from the beginning

B. Cracking of tooth base (about saw blade of carpenter's circular saw machine)

1. Cause of the problem: the wooden bridge plate of the worktable is too thick, and the sawdust is not discharged in circulation. Treatment method: replace the bridge plate

2. The reason of the problem is that the thickness of plate splitter is small; Treatment: increase the thickness of plate splitter

3. The cause of the problem is that the tooth chamber is too small; Treatment: increase the area of the tooth chamber space, different problems appear on the equipment, we need to know what kind of reason is formed, together with what kind of treatment can be used to solve the problem in time, will not affect.

There are many cylinder wholesalers of metal circular saw machine manufacturers on the market now. Different equipment has different ways to deal with the problem, so it shows that we should adopt appropriate methods to deal with this problem anyway.